Don’t Forget About Those OTHER Meraki MX Firewall Rules

I’m a long-time user of the Meraki MX security appliance product line. Going way back to the MX-70, I have found tremendous value in what the MX products can do for my far-off sites. (Here’s an old- and I mean old- case study that gets into the early appreciation of the MX line.) I’ve probably set up maybe 65ish total MX devices through the years in multiple states and countries, doing site-to-site VPN, stand-alone, and also some pretty creative configurations. Despite my experience, I was recently reminded that I don’t know it all about a product that I feel extremely comfortable calling myself an expert on.

In one remote site that connects to the main network with site-to-site VPAN, an NTP vulnerability was flagged on a couple of audio visual devices. The device vendor was of absolutely no help (go figure), and our security team asked if we could help from the Meraki side. “Oh sure…” says I. “We got a firewall to leverage.”

We needed to cabash NTP between the remote site and the main network. I pulled up the Firewall page on the MX and set to work. This is an area in the MX I’ve probably manipulated maybe a couple of dozen times, for everything from stopping phantom ringing on 3rd-party hosted IP phones to simple outbound protocol blocks.

L3 Firewall

That image represents like three stages of desperation in getting rules right- as nothing I did worked. I simply could not tame the NTP beast to/from the two hosts, and it was making me feel silly. My first inclination was to blame Meraki- surely this stupid box must have issues! Except it didn’t… about the only thing Meraki could have done is perhaps mentioned on the L3 Firewall Page that there is a seperate firewall rule set on the VPN configuration page for site-to-site rules. That looks like this:

Site-to-Site FW

I had just never did firewall rules for the site-to-site tunnel. I didn’t know after many years! But I did leverage the Meraki “search our documentation” repository to get educated, with this document that explains it. There’s nothing complicated about it, you just have to know where to find it the first time you need to configure rules for the tunnel versus the Internet edge.

And now you know, too.

 

Tell me what YOU think.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s